get
press
Field of application
Manual front-lever press suitable to the manual application through interchangeable punches of eyelets, rivets, studs and other small metal accessories.
Technical characteristics
- cast-iron body.
- ø 20-mm central pin operated through tempered steel eccentric gear (25-mmm stroke).
- riveting adjustable by adjusting screw.
- minimum arm stress. Spring return lever.
- mechanical stop at the lowest point. Setting of the distance between upper and lower punches for required riveting height.
- provided with 4 holes for workbench fixing.
- standard supplied in ral 3004, ral 7035 and matt black.
Optional equipment
Central pin set up for suction intake.
Kit for vacuum system
Led pointing system with cross, dot, line available in red or green.
Customizable on customer demand
Technical data | |
---|---|
Overall height (lever included) | 480 mm |
Base width | 125 mm |
Overall depth | 250 mm |
Working depth | 130 mm |
Gap between upper item holding-pin and lower base | 70 mm |
Max thrust | 600 kg |
Weight | 8 kg |
Customization
GET Press is fully customizable to meet all requirements.
The pictures show the press in different coulors